medDispense® C series EDU Automated Dispensing Cabinet

TouchPoint Medical provides cost-effective access to high-quality products for students working in simulation labs, enabling faculty and staff to create impactful teaching experiences that prepare our future healthcare heroes for success.

The unit has 6 standard drawers 83.3mm (3.28in) wide, 9 double wide drawers 188mm (7.4in) wide, 1 matrix drawer, and bulk storage on the bottom of the unit.
Each drawer can be configured to hold up to 7 different line items or 1 controlled substance, the same as a typical hospital unit.
This C series Educational Unit has preloaded simulation software which can be modified as your needs change.

CREATE YOUR PRODUCT REQUEST VIRTUAL DEMO

ADD TO FAVORITES

Recommended For:

Simulation Labs

Custom Product Configuration

In-House Global Phone Support

Comprehensive Warranty

POWER

120 volt AC Minimum 10 amp receptacle (red plug preferred).
Configurable for 230 volt AC, minimum 5 amp service, use IEC-320 type C13 cord set.

SPECIFICATIONS

Unit Dimensions:
- Width: 685.8mm (27in) Depth: 588.8mm (22in) Height: 1,550mm (61in)
For educational use only. Not for clinical or diagnostic use. To be used only with direct supervision of a qualified instructor specifically educated for the use of this product. TouchPoint Medical assumes no liability for the improper use of this equipment.

PRODUCT LITERATURE

medDispense® C series EDU Flyer

The medDispense® C series Educational Unit has 6 standard drawers 83.3mm (3.28in) wide, 9 double wide drawers 188mm (7.4in) wide, 1 matrix drawer, and bulk storage on the bottom of the unit. Each drawer can be configured tohold up to 7 different line items or 1 controlled substance, the same as a typical hospital unit. The C series unit has preloaded simulation software which can also be modified as your needs change.

English

Download Document (236.35 KB)

CREATE YOUR PRODUCT

REQUEST VIRTUAL DEMO